; docformat = 'rst' ; ; NAME: ; PS_END ; ; PURPOSE: ; The purpose of PS_START and PS_END is to make it easy to set-up ; and close a PostScript file. These programs are used extensively ; in all Coyote Graphics routines. ;******************************************************************************************; ; ; ; Copyright (c) 2011, by Fanning Software Consulting, Inc. All rights reserved. ; ; ; ; Redistribution and use in source and binary forms, with or without ; ; modification, are permitted provided that the following conditions are met: ; ; ; ; * Redistributions of source code must retain the above copyright ; ; notice, this list of conditions and the following disclaimer. ; ; * Redistributions in binary form must reproduce the above copyright ; ; notice, this list of conditions and the following disclaimer in the ; ; documentation and/or other materials provided with the distribution. ; ; * Neither the name of Fanning Software Consulting, Inc. nor the names of its ; ; contributors may be used to endorse or promote products derived from this ; ; software without specific prior written permission. ; ; ; ; THIS SOFTWARE IS PROVIDED BY FANNING SOFTWARE CONSULTING, INC. ''AS IS'' AND ANY ; ; EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES ; ; OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT ; ; SHALL FANNING SOFTWARE CONSULTING, INC. BE LIABLE FOR ANY DIRECT, INDIRECT, ; ; INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED ; ; TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; ; ; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ; ; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ; ; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ; ; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ; ;******************************************************************************************; ; ;+ ; The purpose of `PS_START` and PS_END is to make it easy to set-up ; and close a PostScript file. These programs are used extensively ; in all Coyote Graphics routines. ; ; If `ImageMagick ` is installed ; on your computer, you can easily convert PostScript output to GIF, JPEG, PNG, and TIFF ; raster output. If `Ghostscript ` is installed ; you can convert PostScript output to PDF files. See the appropriate keywords below. ; ; When PS_START is called, the current graphics device is set to "PS" (the PostScript ; device). When PS_END is called the current graphics device is returned to the device ; in effect when PS_START was called. ; :Categories: ; Utilities, Graphics ; ; :Keywords: ; allow_transparent: in, optional, type=boolean, default=0 ; To make the background of some image files white, rather than transparent, ; you have to set the "-alpha off" string in the ImageMagick call. This ; string is automatically added to the ImageMagick call unless this keyword ; is set, in which case the string is not added and the image background will ; be transparent. ; bmp: in, optional, type=boolean, default=0 ; Set this keyword to convert the PostScript output file to a BMP image. Requires ImageMagick. ; delete_ps: in, optional, type=boolean, default=0 ; Setting this keyword will delete the PostScript file that is used as the intermediate ; file in the conversion to other file types. ; density: in, optional, type=integer, default=300 ; The horizontal and vertical density (in dots per inch, DPI) of the image when the PostScript file ; is converted to a raster format by ImageMagick. ; filetype: in, optional, type='string', default="" ; This keyword provides a generic way of setting the `BMP`, `GIF`, `JPEG`, `PNG`, and `TIFF` ; keywords. Set this keyword to the type of file output desired, and the correct "output" ; keyword will be set. ; gif: in, optional, type=boolean, default=0 ; Set this keyword to convert the PostScript output file to a GIF image. Requires ImageMagick. ; gs_path: in, optional, type=string ; This program assumes that UNIX users can access Ghostscript with the "gs" ; command. It assumes WINDOWS users have installed Ghostscript in either ; the C:\gs or C:\Program Files\gs directories. If either of these assumptions ; is incorrect, you can specify the directory where the Ghostscript executable ; resides with this keyword. (The Windows 32-bit executable is named gswin32c.exe ; and the 64-bit executable is named gswin64c.exe.) Passed directly to cgPS2PDF. ; im_options: in, optional, type=string, default="" ; A string of ImageMagick "convert" options that can be passed to the ImageMagick convert ; command. No error checking occurs with this string. ; jpeg: in, optional, type=boolean, default=0 ; Set this keyword to convert the PostScript output file to a JPEG image. Requires ImageMagick. ; nofix: in, optional, type=boolean, default=0 ; If this keyword is set, then the cgFixPS program to fix IDL landscape ; PostScript files is not called. ; nomessage: in, optional, type=boolean, default=0 ; If this keyword is set, then no error messages are issued. The keyword is used primarily ; to allow PS_END to reset the internal structure without a lot of ruckus. ; outfilename: out, optional, type=string ; The name of the output filename created by the program. ; pdf: in, optional, type=boolean, default=0 ; Set this keyword to convert the PostScript output file to a PDF file. Requires Ghostscript. ; png: in, optional, type=boolean, default=0 ; Set this keyword to convert the PostScript output file to a PNG image. Requires ImageMagick. ; Normally, 24-bit PNG files are created. However, if the IM_PNG8 keyword is set with ; cgWindow_SetDefs, then PS_End will create an 8-bit PNG file instead. ; resize: in, optional, type=integer, default=25 ; If an image is being created from the PostScript file, it is often resized by some ; amount. You can use this keyword to change the value (e.g, RESIZE=100). ; The value is passed on to resize argument as a percentage in the ImageMagick call. ; showcmd: in, optional, type=boolean, default=0 ; Set this command to show the command used to do any PostScript coversions. ; tiff: in, optional, type=boolean, default=0 ; Set this keyword to convert the PostScript output file to a TIFF image. Requires ImageMagick. ; unix_convert_cmd: in, optional, type=string ; There are a number of commands on UNIX machines for converting PostScript files ; to PDF files. This program assumes you are using Ghostscript to do the conversion ; for you. The Ghostscript command on most UNIX machines is "gs", which is used if ; this keyword is undefined. However, if you would prefer to use another program to do ; the conversion for you, you can specify the name of the command here. For example, ; "pstopdf" or "epstopdf". In creating the actual command, this command will be ; separated by a space from the input file name. In other words, if the alternative ; conversion command was "pstopdf", the actual command would be "pstopdf" + " " + ps_file. ; Any output filename is ignored. This command does not apply to Macintosh or Windows ; computers. Passed directly to cgPS2PDF. ; width: in, optional, type=integer ; Set the keyword to the final pixel width of the output raster image. Applies ; only to raster image file output (e.g., JPEG, PNG, TIFF, etc.). The height of ; the image is chosen to preserve the image aspect ratio. ; ; :Examples: ; To create a line plot in a PostScript file named lineplot.ps and ; also create a PNG file named lineplot.png for display in a browser, ; type these commands:: ; ; PS_Start, FILENAME='lineplot.ps' ; cgPlot, Findgen(11), COLOR='navy', /NODATA, XTITLE='Time', YTITLE='Signal' ; cgPlot, Findgen(11), COLOR='indian red', /OVERPLOT ; cgPlot, Findgen(11), COLOR='olive', PSYM=2, /OVERPLOT ; PS_End, /PNG ; ; :Author: ; FANNING SOFTWARE CONSULTING:: ; David W. Fanning ; 1645 Sheely Drive ; Fort Collins, CO 80526 USA ; Phone: 970-221-0438 ; E-mail: david@idlcoyote.com ; Coyote's Guide to IDL Programming: http://www.idlcoyote.com ; ; :History: ; Change History:: ; Written by: David W. Fanning, 20 May 2008. ; Slight modification to allow filenames with spaces in them. ; Added NoMatch keyword. 17 March 2009. DWF. ; Added a number of keywords to make these commands more configurable. 19 March 2009. DWF. ; Only set thickness system variables if starting system variables are set to their ; default values (namely, 0). This allows users to set their own system variables ; before they call PS_START, rather than after. 23 March 2009. DWF. ; Moved PS_END to its own file to allow the IDLExBr_Assistant to work properly. 7 April 2009. DWF. ; Reordered ImageMagick commands to put them in the proper sequence to get "alpha" switch to work. 23 April 2009. DWF. ; Put the switches *ahead* of the PostScript file name. Now resizing works and default size reduction ; returned to 25%. 23 April 2009. DWF. ; Still having a devil of a time getting the ImageMagick "convert" command right. Fonts ; have become a problem. Now trying a "flatten" option in the command. 12 May 2009. DWF. ; If the PostScript file is in Landscape mode, it is now "fixed" with cgFixPS to allow it ; to be displayed right-side up in PostScript viewers. 8 August 2009. DWF. ; Fixed a problem in not checking the GIF keyword properly. 4 December 2009. DWF. ; Added NOFIX keyword to the program. 1 November 2010. DWF. ; Added better handing of errors coming from cgFixPS after update to FIXPS. 15 November 2010. DWF. ; Added DELETE_PS keyword. 16 Jan 2011. DWF. ; Better protection of code from not finding ImageMagick. 17 Jan 2011. DWF. ; Collecting result of SPAWN command. Only printing if QUIET=0. 16 Feb 2011. DWF. ; Changes to handle inability to create raster files from PS encapsulated files in ; landscape mode. Added NOMESSAGE keyword. 26 Aug 2011. DWF. ; Added PDF keyword. Requires Ghostscript to use. 6 Dec 2011. DWF. ; Added SHOWCMD keyword. 9 Dec 2011. DWF. ; Added OUTFILENAME keyword. 11 Dec 2011. DWF. ; Just realized a BMP case is missing from one of the CASE statements. 12 Dec 2011. DWF. ; Added GS_PATH and UNIX_CONVERT_CMD keywords to support PDF output. 14 Dec 2011. DWF. ; Add the WIDTH keyword. 3 April 2012. DWF. ; Added a check for IM_PNG8 keyword, using cgWindow_GetDefs to see if an 8-bit or 24-bit ; PNG file should be created. 3 April 2012. DWF. ; Modified the ImageMagick commands that resizes the image to a particular width. Necessary ; to accommodate PNG8 file output. Using ImageMagick 6.7.2-9. 4 April 2012. DWF. ; Added FILETYPE keyword to provide a generic way of creating raster file output. 30 August 2012. DWF. ; Modified to use the cgPS2Raster program so code doesn't have to be maintained in ; two places. 15 Oct 2012. DWF. ; Added a check for ImageMagick and an informational message for raster operations. 4 Nov 2012. DWF. ; Fixed a problem in which the NOMESSAGE keyword was not getting passed along to cgPS2Raster. 5 Nov 2012. DWF. ; Fixed a problem where I was not passing the PORTRAIT keyword to cgPS2Raster properly. 22 Jan 2013. DWF. ; Modified to restore the input True-Type font for PostScript devices. 22 May 2013. DWF. ; Retired this program and changed name to cgPS_Close. 4 Nov 2013. DWF. ; ; :Copyright: ; Copyright (c) 2008-2012, Fanning Software Consulting, Inc. ;- PRO PS_END, $ ALLOW_TRANSPARENT=allow_transparent, $ BMP=bmp, $ DELETE_PS=delete_ps, $ DENSITY=density, $ IM_OPTIONS=im_options, $ FILETYPE=filetype, $ GIF=gif, $ GS_PATH=gs_path, $ JPEG=jpeg, $ NOFIX=nofix, $ NOMESSAGE=nomessage, $ OUTFILENAME=outfilename, $ PDF=pdf, $ PNG=png, $ RESIZE=resize, $ SHOWCMD=showcmd, $ TIFF=tiff, $ UNIX_CONVERT_CMD=unix_convert_cmd, $ WIDTH=width COMMON _$FSC_PS_START_, ps_struct Catch, theError IF theError NE 0 THEN BEGIN Catch, /CANCEL ; Issue an error message, unless messages are turned off. IF ~Keyword_Set(nomessage) THEN void = cgErrorMsg() ; Clean up. IF ps_struct.currentDevice NE "" THEN Set_Plot, ps_struct.currentDevice !P = ps_struct.p !X = ps_struct.x !Y = ps_struct.y !Z = ps_struct.z ps_struct.setup = 0 ps_struct.currentDevice = "" ps_struct.filename = "" ps_struct.convert = "" RETURN ENDIF ; Close the PostScript file, if this is PostScript device. IF !D.Name EQ 'PS' THEN Device, /CLOSE_FILE xsize = !D.X_Size ysize = !D.Y_Size ps_filename = ps_struct.filename showcmd = Keyword_Set(showcmd) ; If the file is in landscape mode, then fix it so that the plot ; is right-side up. IF ps_struct.landscape THEN BEGIN IF ~Keyword_Set(nofix) THEN BEGIN cgFixPS, ps_struct.filename, PAGETYPE=ps_struct.pagetype, SUCCESS=success, QUIET=1 IF success EQ 0 THEN Print, 'Encountered problem fixing landscape PostScript file. Proceeding...' ENDIF portrait = 0 ENDIF ELSE portrait = 1 ; Need to convert the PostScript to a raster file? needRaster = 0 allow_transparent = Keyword_Set(allow_transparent) IF N_Elements(filetype) EQ 0 THEN filetype = "" CASE StrUpCase(filetype) OF 'BMP': bmp = 1 'GIF': gif = 1 'PDF': pdf = 1 'PNG': png = 1 'JPEG': jpeg = 1 'JPG': jpeg = 1 'TIFF': tiff = 1 'TIF': tiff = 1 "": ELSE: BEGIN void = Dialog_Message('File type ' + StrUpCase(filetype) + ' invalid. No raster created.') needRaster = 0 END ENDCASE IF Keyword_Set(bmp) THEN needRaster = 1 IF Keyword_Set(gif) THEN needRaster = 1 IF Keyword_Set(pdf) THEN needRaster = 1 IF Keyword_Set(png) THEN needRaster = 1 IF Keyword_Set(jpeg) THEN needRaster = 1 IF Keyword_Set(tiff) THEN needRaster = 1 SetDefaultValue, density, 300 SetDefaultValue, resize, 25 IF needRaster THEN BEGIN IF cgHasImageMagick() THEN BEGIN cgPS2Raster, ps_filename, raster_filename, $ ALLOW_TRANSPARENT=allow_transparent, $ BMP=bmp, $ DELETE_PS=delete_ps, $ DENSITY=density, $ IM_OPTIONS=im_options, $ FILETYPE=filetype, $ GIF=gif, $ JPEG=jpeg, $ OUTFILENAME=outfilename, $ PDF=pdf, $ PNG=png, $ PORTRAIT=portrait, $ RESIZE=resize, $ SHOWCMD=showcmd, $ SILENT=Keyword_Set(nomessage), $ SUCCESS=success, $ TIFF=tiff, $ WIDTH=width ENDIF ELSE BEGIN Print, '' Print, 'Message from the PS_End Program:' Print, ' The requested raster operation cannot be completed unless ImageMagick is installed.' delete_ps = 0 Print, ' The requested PostScript file has been saved: ' + ps_filename + '.' Print, ' Please see http://www.idlcoyote.com/graphics_tips/weboutput.php for details' Print, ' about converting PostScript intermediate files to raster files via ImageMagick. void = Dialog_Message('PS_End: ImageMagick must be installed to complete raster operation.') ENDELSE ENDIF ; Restore the previous True-Type font state for the PostScript device. IF !D.Name EQ 'PS' THEN Device, Set_Font=ps_struct.tt_font_old, /TT_Font ; Clean up. IF ps_struct.currentDevice NE "" THEN Set_Plot, ps_struct.currentDevice !P = ps_struct.p !X = ps_struct.x !Y = ps_struct.y !Z = ps_struct.z ps_struct.setup = 0 ps_struct.currentDevice = "" ps_struct.filename = "" ps_struct.convert = "" END ;---------------------------------------------------------------